10GBASE-T SFP+ Copper RJ-45 30m 恒宝通 HTSFP-XG-1111TF 模块

Descriptions HTSFP-XG-1111TF supports SGMII to Copper Auto-negotiation mode . compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2012 and IEEE 802.3ab, which supports 10/100/1000Base-T Copper data-rate up to 100 meters reach over twisted-pair category 5 cable. The HTSFP-XG-1111TF provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2-wire serial bus at address ACh. The address of the PHY is 1010110x where x is the R/W bit. Features ● Supports XFI(SFI)or SGMII to Copper Auto-negotiation. ● 10G BASE-T operation in Host Systems with XFI(SFI) Interface. ● 10G BASE-T supports Links up to 30m using Cat 6a/7 Cable. Power Consumption 2.5W MAX @ 30m. ● 10/100/1000 BASE-T operation in Host Systems with SGMII Interface. ● 10/100/1000 BASE-T supports Links up to 100m using Cat 5 Cable or better. ● Unshielded and Shielded cable support. ● MDI/MDIX Crossover. ● 3.3V Single Power Supply. ● Hot-pluggable SFP Footprint. Fully Metallic Enclosure for Low EMI. ● Compact RJ-45 Connector Assembly. ● Detailed Product Information in EEPROM. ● Access to I2C -Wire Serial Bus Interface for Serial ID and PHY Register Access. ● Compliant with SFF-8431 SFF-8432 and SFF-8472. ● Compliant with SFP MSA. ● Compliant with IEEE 802.3-2012, IEEE 802.3az. ● Compliant with FCC 47 CFR Part 15 Class B / EN55022 Class B. ● Compliant with RoHs-6. ● Operation temperature range 0°C to 70°C. Application ● 10 Gigabit Ethernet over Category 6a/7 Cable ● Switch/Route to Switch/Route Link ● High Speed I/O for File Servers Ordering Information Part No. DESCRIPTION LABEL MARKING HTSFP-XG-1111TF 10G /5G /2.5GBase-T and 10/100/1000Base-T default for all speed advertisement to XFI interface with Rate Matching, enable the auto-negotiation default, with Tx_disable function, support Rx_LOS as link indication function, 10GBase-T over Category 6a/7 Cable up to 30m, 10/100/1000Base-T over unshielded twisted-pair (UTP) Category 5 Cable up to 100m, operation temperature 0～70℃ HTSFP-XG-1121TF 10G /5G /2.5GBase-T and 10/100/1000Base-T default for all speed advertisement to XFI interface with Rate Matching, enable the auto-negotiation default, with Tx_disable function, support Rx_LOS as link indication function, 10GBase-T over Category 6a/7 Cable up to 30m, 10/100/1000Base-T over unshielded twisted-pair (UTP) Category 5 Cable up to 100m, operation temperature -40～85℃ HTSFP-XG-1112TF 10G /5G /2.5GBase-T and 10/100/1000Base-T default for all speed advertisement to XFI/5GBase-R/2.5GBase-X/SGMII interface and SGMII Auto-Negotiation Off default, with Tx_disable function, support Rx_LOS as link indication function, 10GBase-T over Category 6a/7 Cable up to 30m, 10/100/1000Base-T over unshielded twisted-pair (UTP) Category 5 Cable up to 100m, operation temperature 0～70℃ HTSFP-XG-1122TF 10G /5G /2.5GBase-T and 10/100/1000Base-T default for all speed advertisement to XFI/5GBase-R/2.5GBase-X/SGMII interface and SGMII Auto-Negotiation Off default, with Tx_disable function, support Rx_LOS as link indication function, 10GBase-T over Category 6a/7 Cable up to 30m, 10/100/1000Base-T over unshielded twisted-pair (UTP) Category 5 Cable up to 100m, operation temperature -40～85℃ HTSFP-XG-1113TF 10G /5G /2.5GBase-T and 10/100/1000Base-T default for all speed advertisement to XFI/5GBase-R/2.5GBase-X/SGMII interface and SGMII Auto-Negotiation On, enable the auto-negotiation default, with Tx_disable function, support Rx_LOS as link indication function, 10GBase-T over Category 6a/7 Cable up to 30m, 10/100/1000Base-T over unshielded twisted-pair (UTP) Category 5 Cable up to 100m, operation temperature 0～70℃ HTSFP-XG-1123TF 10G /5G /2.5GBase-T and 10/100/1000Base-T default for all speed advertisement to XFI/5GBase-R/2.5GBase-X/SGMII interface and SGMII Auto-Negotiation On, enable the auto-negotiation default, with Tx_disable function, support Rx_LOS as link indication function, 10GBase-T over Category 6a/7 Cable up to 30m, 10/100/1000Base-T over unshielded twisted-pair (UTP) Category 5 Cable up to 100m, operation temperature -40～85℃ HTSFP-XG-1114TF 10G /5G /2.5GBase-T and 10/100/1000Base-T default for all speed advertisement to USXGMII interface, enable the auto-negotiation default, with Tx_disable function, support Rx_LOS as link indication function, 10GBase-T over Category 6a/7 Cable up to 30m, 10/100/1000Base-T over unshielded twisted-pair (UTP) Category 5 Cable up to 100m, operation temperature 0～70℃ HTSFP-XG-1124TF 10G /5G /2.5GBase-T and 10/100/1000Base-T default for all speed advertisement to USXGMII interface, enable the auto-negotiation default, with Tx_disable function, support Rx_LOS as link indication function, 10GBase-T over Category 6a/7 Cable up to 30m, 10/100/1000Base-T over unshielded twisted-pair (UTP) Category 5 Cable up to 100m, operation temperature -40～85℃ Notes: 1. Adding the Capital "F" at the end of the PN for RoHs compliant product. 2. Automatic crossover detection is enabled. External crossover cable is not required. 3. 10GBASE-T operation requires the host system to have an SFI interface with no clocks. 4. 10/100/1000 BASE-T operation requires the host system to have an SGMII interface with no clocks.